|
|
TM
9-2320-209-20-3-2
FRAME
2
Using
9/16-inch
wrench, screw on and tighten four nuts (1) on studs (2).
1.
Using
long
nose
pliers, put yoke (3) on lever (4), lining up holes. Put
clevis
pin
(5)
through
yoke
and
lever.
2.
Put washer (6) on clevis pin (5).
Put cotter pin (7)
through
hole
in
clevis
pin.
Using pliers, bend open ends of cotter pin.
GO
TO
FRAME
3
13-28
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |