|
|
![]() TM 9-2320-209-20-3-1
FRAME 2
1.
Using screwdriver, screw two adjusting screws (1) halfway into adjusting
screw nuts (2).
2.
Hook one end of spring (3) into hole in headlamp housing (4).
Put two grooves on ring assembly (5) into grooves on two adjusting screws (1)
3.
and push ring assembly into headlamp housing (4).
4.
Using long nose pliers, hook free end of spring (3) into hole in ring assembly
(5).
NOTE
Follow-on Maintenance Action Required:
1.
Replace front service headlight sealed beam. Refer to
2.
Replace front service headlight assembly. Refer to
Do front service headlight assembly adjustment. Refer
3.
to para 7-19.
END OF TASK
7-94
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |