|
|
![]() TM 9-2320-209-20-3-1
Line up hole in rod end clevis (1) with hole in bracket (2) by moving
1.
radiator (3).
2.
Put bolt (4) through rod end clevis (1) and bracket ( 2).
Using 9/16-inch wrenches, screw on and tighten locknut (5).
3.
4.
Make sure one clamp (6) is at each end of hose (7).
5.
Using screwdriver, tighten two screws (8).
GO TO FRAME 5
6-25
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |