 |
|||
|
|
|||
|
Page Title:
HOSES AND CLAMPS REMOVAL AND REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320- 209-20-3-1
Using 9/16-inch wrench, unscrew and take out two screws (1) with flat
1.
washers (2).
Using screwdriver, loosen two screws (3) on clamps (4).
2.
Slide two clamps (4) down on hose (5).
3.
Pull out thermostat housing (6).
4.
5.
Take off and throw away gasket (7).
Pull off hose (5).
6.
7.
Take clamps (4) off hose (5).
Using screwdriver, loosen two screws (8) on clamps ( 9).
8.
Slide two clamps (9) down on hose (10).
9.
Pull off hose (10) and take off two clamps (9).
10.
END OF TASK
TA 047651
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version