 |
|||
|
|
|||
|
Page Title:
ENGINE MANIFOLD HEATER PUMP LINES AND FITTINGS REMOVAL AND REPLACEMENT (TRUCKS WITH ENGINES LDS 427-2 AND LDS 465-l) - contin... |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
Using 9/16-inch open end wrench, hold nut (1) on fuel return hose (2).
1.
Using 7/16-inch open end wrench, screw in and tighten nut ( 3) from return
2.
tube (4) into hose (2).
Using 9/16-inch open end wrench, hold nut (5) on fuel supply hose (6).
3.
Using 7/16-inch open end wrench, screw in and tighten nut (7) from supply
4.
tube (8) into hose (6) .
NOTE
Follow-on Maintenance Action Required:
Replace intake air cleaner. Refer to para 4-3.
1.
2.
Reconnect battery ground cable. Refer to para 7-58.
3.
Operate engine manifold heater. Refer to
TM 9-2320-209-10.
4.
Check all manifold heater fuel lines and fittings for
leaks.
5.
Turn off engine manifold heater. Refer to
TM 9-2320-209-10.
END OF TASK
TA 082250
4-120
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version