Table 1-1. Operator /Crew Preventive Maintenance Checks and Services - continued

9-2320-209-10-2/TO36A12-lB-l09l-2

Table 11. Operator/Crew Preventive Maintenance Checks and Services - Cont

NOTE: These checks are to be made in the order listed, within designated interval.

AAfter operation

MMonthly

BBefore operation

WWeekly

DDuring operation

Interval

Equipment is

Item to be Inspected

Item

not ready/

Procedure: Check for and have repaired, filled,

No.

available if

or adjusted as needed

AWM

Gages do not read

c. Check engine instruments on instrument panel

within limits given.

(cont)

for steady, normal readings as follows:

Oil Pressure is less

Oil pressure -- 10-75 psi (69 -517.125 kPa)

than 10 psi.

Temperature -- 180- 200F (82.3 - 93.3C)

Temp. more than

210F

Air Pressure -- 85-120 psi (585.775 -827.586 kPa)

Air pressure 60 psi

Battery/

or below.

Generator -- In green area

Gage needle reads in

red area.

Tachometer -- Idle: 650-850 RPM

Tach gage is not

-- Max: 2600-2900 RPM

with in limits.

Fuel

-- Shows fuel level

NOTE

Inoperative fuel gage does not down vehicle.

Inoperative or will

d. Engine stop cable

not lock in the out

CAUTION

position

Do not attempt to force cable handle in-

ward while serrations are interlocked.

This will strip the serrations on the cable

and render the vehicle inoperative.

1-12

Change 2