Source Code - TM-10-5411-233-13-P0287

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0042 00

REPAIR PARTS SPECIAL TOOLS LIST (RPSTL) INTRODUCTION

MH-Made at GS

in the DESCRIPTION AND USABLE

level

ON CODE (UOC) column and listed in

ML-Made at SRA

the bulk material group work

MD-Made at depot

package of the RPSTL. If the item

is authorized to you by the 3rd position

code of the SMR code, but the

source code indicates it is made at

higher level, order the item from

the higher level of maintenance.

AO-Assembled by

Items with these codes are not to be re-

unit/AVUM level

quested/requisitioned individually. The

AF-Assembled by

parts that make up the assembled item

DS/AVIM level

must be requisitioned or fabricated and

AH-Assembled by

assembled at the level of maintenance

GS level

indicated by the source code. If the

AL-Assembled by

3rd position of the SMR code authorizes

SRA

you to replace the item, but the source

AD-Assembled by

code indicates the item is assembled at

depot

a higher level, order the item from the

higher level of maintenance.

Do not requisition an "XA" coded item. Order the next higher

assembly. (Refer to NOTE below.)

If an item is not available from salvage, order it using the CAGEC

and P/N.

Installation drawings, diagrams, instruction sheets, field service

drawings; identified by manufacturer's P/N.

Item is not stocked. Order an XD-coded item through normal supply

channels using the CAGEC and P/N given, if no NSN is

available.

NOTE

Cannibalization or controlled exchange, when authorized, may be used

as a source of supply for items with the above source codes except for

those items source coded "XA" or those aircraft support items restricted

by requirements of AR 750-1.

Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to use and repair

support items. The maintenance codes are entered in the third and fourth positions of the SMR code as

follows:

Third Position. The maintenance code entered in the third position tells you the lowest maintenance level

authorized to remove, replace, and use an item. The maintenance code entered in the third position will

indicate authorization to the following levels of maintenance:

0042 00-3