SIDE WALL REPAIR OF PUNCTURE WITH CORE FRACTURE - continued

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0020 00

UNIT MAINTENANCE

Proceed with the coating and rinsing until the entire surface is coated with alodine.

Rinse. Before the alodine solution dries, wipe it from the surface with a clean cloth or sponge wet with

clean water. The alodine solution may also be rinsed from the surface with clean water from a hose.

Dry. After the rinsing has been finished, allow the work to air dry. Drying can be speeded by wiping with

clean, dry rags. Clean, dry, compressed air should be used to blow moisture from joints, depressions,

etc., and to speed the drying. When the surface is entirely dry, the part is ready for service without further

treatment, or if desired, it may be painted in accordance with manufacturer's directions.

Refinish in accordance with WP 0039.

1/2 inch

1 inch (25.4 mm)

(12.7 mm)

typical

1/8 inch (3.18 mm)

diameter typical

END OF WORK PACKAGE

0020 00-4