LADDER INSTALLATION PROCEDURE - continued

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0016 00

UNIT MAINTENANCE

Step 11. Using the ladder as a "template", attach the second uninstalled bracket to the opposite side of

the ladder (I,e,, opposite the installed bracket). Position the second uninstalled bracket so that the

mounting holes face the first bracket and toward the front edge of the tailgate. Ensure that the opening on

the bracket faces the left edge of the tailgate. Mark the position of the two holes in the second uninstalled

bracket. Remove the ladder from the tailgate.

Uninstalled second bracket

Installed first bracket

Step 12. Repeat prior Steps 6 through 9 to complete installation of the second bracket.

Mounting strap assemblies for ladder stowage

Step 1. To install the two strap assemblies used to stow the ladder, use a tape measure and make a

mark 48 1/4 inches from the left edge of the tailgate at its front edge.

Step 2. Make a second mark 48 1/4 inches from the left edge, but approximately 15 inches back from the

front edge.

0016 00-7