LADDER INSTALLATION PROCEDURE - continued

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0016 00

UNIT MAINTENANCE

Step 3. Measure 1 1/2 inches from the front edge of the tailgate along the 2 inch vertical line and make a

mark.

Step 4. Make a second mark approximately 3 inches to the right of the 1 1/2 inch mark and draw a line

connecting the two marks with a straight edge.

intersection

Step 5. Place the first bracket in position at the intersection point located 14 inches in from the left edge

and 1 1/2 inches from the front edge of the tailgate. Be sure to select the larger "stowage" bracket as

these brackets are different from the smaller "deployment" brackets. Position the bracket so that the

mounting holes face the rear edge of the tailgate. Ensure that the opening on the bracket faces the left

edge of the tailgate. Mark the position of the two holes in the first bracket.

Step 6. Using a 9/32 inch transfer punch, mark the center of the two mounting holes.

0016 00-5