Table 1. Preventive Maintenance Checks and Services (PMCS) for Cargo Bed Cover

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0012 00

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

THIS SECTION COVERS:

Before Operation PMCS Checks and Services

INITIAL SETUP:

CBC in extended and locked position

Maintenance Level

Operator

Table 1. Preventive Maintenance Checks and Services (PMCS) for Cargo Bed Cover

ITEM

INTERVAL

ITEM TO BE

PROCEDURE

EQUIPMENT

NO.

CHECKED OR

NOT READY/

SERVICED

AVAILABLE IF:

Personnel door does not open

Before

Upper Door

Ensure that upper (1) door section is properly

or close properly.

Assembly

engaged. Verify that the three twist knobs (2) securing

Door latch mechanism does not

the upper (1) and lower (3) door sections are tightened

operate properly or hairpin

securely. Verify that hairpin cotter (4) in door latch

cotter is missing.

mechanism (5) is installed and undamaged. Verify that

Fabric pull strap is damaged or

fabric pull strap (6) is undamaged. Check for free and

missing.

easy operation of Personnel Door (7), latch mechanism

Door hold-open device is

(5), and door hold-open device (8). Verify that door

damaged or does not operate

latch rods (18) do not have excessive wear at the point

properly.

where they pass through the rod guides (19).

Ends of door latch roads are

excessively worn.

Before

Lower Door

Lower door section does not

Ensure that the lower door section (3) is properly

Assembly

attach securely to the upper

engaged and secured to the upper door section (1).

door section.

Roof access steps are cracked,

Before

Upper and Lower Check for free and easy operation of roof access

folding steps (9). Ensure that the folding steps operate broken, or otherwise damaged.

Steps

properly. Check for any cracks or breaks in the folding Roof access step hardware

missing.

steps including loose or missing attaching hardware

(10) that would create an unsafe condition.

Lift rings cracked broken or

Before

Lift Rings

Check for free and easy operation of Lift Rings (11).

otherwise damaged.

Ensure that the lift rings operate properly. Check for

any cracks or breaks in the assembly that would create Lifitng ring hardware missing.

an unsafe condition. Check for any loose or missing

attaching hardware (12) that would create an unsafe

condition.

Lifitng/locking assembly does

Before

Lifting/Locking

Inspect the condition of the lifting/locking assemblies

(13). If the CBC is in the height extended mode, ensure not swing into position properly.

Assemblies

Locking mechanism does not

that the lifting/locking assemblies are in their vertical

engage properly.

and locked position.

Lifting/locking assembly does

not stow properly.

Before

Handhold

Ensure that the roof access step handhold attaching

Roof access handhold

attaching hardware missing or

hardware (14) is secure and not missing.

not secure.

Before

Ventilation Port

Ventilation ports blocked or air

Make sure that the ventilation ports (15) are not

filter dirty.

blocked. Inspect the air filter (16) and clean if

necessary.

Cable damaged, frayed, or

Before

Cabling

Inspect the visible portion of the cabling in the upper

abraded.

section cable channel. Verify that the winch cabling

(17) has not been damaged, frayed, or abraded in any

way.

Carrier hardware missing or not

Before

Carrier Mounting

Ensure that all carrier mounting hardware (18) is

secure.

Bolts

securely tightened. Ensure that all vehicle mounting kit

Vehicle mounting kit hardware

mounting hardware (19) is tightened securely.

missing or not secure.

0012 00-3