PREPARATION FOR MOVEMENT - TM-10-5411-233-13-P0075

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0005 00

OPERATION UNDER USUAL CONDITIONS

PREPARATION FOR MOVEMENT

When preparing to move from one field location to another for continued operation, the Cargo Bed Cover

can be left installed on the vehicle. It may be left in either the extended or retracted position.

If the CBC is in the extended position prior to movement, any cables entering the power and signal line

ports on the sidewalls of the CBC should be removed and the ports covered as detailed earlier in this

work package.

The personnel door should be closed and locked securely.

The ladder should be stowed and secured in place at the rear of the vehicle.

PREPARATION FOR STORAGE

The Cargo Bed Cover may be stored on or off of the vehicle. Prior to going into storage, all "After

Operation" PMCS procedures as outlined in WP 0012 should be completed. Reasonable steps should be

taken to provide a dry place protected from environmental extremes such as dust and rain for storage.

If the CBC will be stored off vehicle, it should be left in its fully extended position with the door closed and

locked.

If any CBC assemblies are in need of repair, the appropriate requests should be forwarded to Unit or

Direct Support maintenance as required.

All lubrication should be performed as detailed in WP 0007 entitled Lubrication Requirements prior to

storage.

0005 00-33/(34 Blank)