INSTALLATION - TM-9-6115-661-13-P0170

TM 9-6115-661-13&P

5. Attach lifting equipment (2) with a minimum lifting capacity of 6000 lb as shown in figure 5-10.

6. Insert ropes (10) through each of four lifting rings (8) on the generator set as shown in figure 5-10.

7. With one person at each rope (10) to steady and guide generator set (9), lift generator set.

INSTALLATION

WARNING

When lifting the generator set, use lifting equipment with a minimum

lifting capacity of 6000 lb. Do not stand under the generator set while it

is being lifted. Do not permit generator set to swing. Failure to observe

this warning can result in severe personal injury or death.

1. Attach lifting equipment (2) with a minimum lifting capacity of 6000 lb as shown in figure 5-10.

2. Insert rope (10) through four lifting rings (8) on generator set (9).

3. With one person at each rope (10) to steady and guide the generator set (9), lift the generator set.

4. Guide generator set skids into position on the trailer and lower generator set onto trailer.

NOTE

Step 5 applies to all generator sets.

5. For PU-801A generator set, install four screws (6), eight flat washers (7), four lock washers, and

plain nuts (6). For all other units, install four screws (1), eight flat washers (7), and four new self-

locking nuts (6) that secure generator set (9).

5-14.1/(5-14.2 Blank)

Change 3