Table 5. Electrical System Troubleshooting Procedures - continued

TM 9-2320-391-10

ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0069 00

ELECTRICAL SYSTEM Continued

Table 5. Electrical System Troubleshooting Procedures Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

68. FRONT AND REAR

3. Position main light switch to

TURN SIGNALS DO

SER DRIVE (WP 0004 00).

NOT ILLUMINATE -

Continued

4. Check circuit breaker to see if

it is tripped again. If circuit

breaker is tripped or trips

again, Notify Field

Maintenance.

5. Position main light switch to

OFF (WP 0004 00).

6. Install PDP cover (WP 0095

00).

4. Check to see if front

If front and rear turn signals

and rear turn signals

do not illuminate, notify Field

illuminate (WP 0007

Maintenance.

00).

69. LEFT OR RIGHT

1. Check to see if rear

If rear turn signals do not

FRONT TURN

turn signals

illuminate, perform

SIGNAL DOES NOT

illuminate (WP 0007

Malfunction 68 (Front And

ILLUMINATE

00).

Rear Turn Signals Do Not

Illuminate).

2. Check to see if left

If left and right front turn

and right front turn

signals do not illuminate,

signals illuminate

notify Field Maintenance.

(WP 0007 00).

70. ONE OR BOTH

1. Check to see if

If blackout stoplights do not

STOPLIGHTS DO

blackout stoplights

illuminate, perform

NOT ILLUMINATE

illuminate (WP 0016

Malfunction 72 (Stoplights

00).

And Blackout Stoplights Do

Not Illuminate).

2. Check to see if one

If one stoplight illuminate,

stoplight illuminates

notify Field Maintenance.

(WP 0016 00).

0069 00-72