 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-391-10
EMERGENCY PROCEDURES - Continued
0058 00
STARTING DISABLED VEHICLE - Continued
WARNING
Ensure master power switch on both vehicles is turned off before
connecting NATO power cable. Vehicles must not touch each other.
Failure to comply may result in electrical shock.
2.
Shut down engine (WP 0016 00) on service vehicle.
CAUTION
Always connect NATO power cable to disabled vehicle before connecting it to
service vehicle. Failure to comply may result in damage to batteries or cable.
3.
Remove cap (2) from NATO receptacle (1) on disabled vehicle.
4.
Install NATO power cable (3) on NATO receptacle (1) on disabled vehicle.
5.
Remove cap (2) from NATO receptacle (1) on service vehicle.
6.
Install NATO power cable (3) on NATO receptacle (1) on service vehicle.
NOTE
Steps 7 through 9 require the aid of an assistant.
7.
Start engine (WP 0016 00) on service vehicle.
8.
Press LO IDLE/HI IDLE switch (4) to engage HI IDLE.
0058 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version