DECOMPRESSING SUSPENSION - continued

TM 9-2320-391-10

PREPARATION FOR INTERNAL AIR TRANSPORT,

0052 00

HIGHWAY, OR RAIL SHIPMENT Continued

DECOMPRESSING SUSPENSION - Continued

15. Position SUSPENSION knob (33) to LOWER.

NOTE

Use back-up hydraulic pump (WP 0037 00) if pressing PUMP knob does not

accomplish step (16).

16. Press PUMP knob (35) until cylinder rod (46) is fully retracted and two safety pins

(31) can be inserted in compression cylinder (32).

NOTE

Left and right side suspension compression plates are installed the same

way. Right side suspension compression plate shown.

17. Install two safety pins (31) in compression cylinder (32).

18. Install suspension compression plate (30) on stud (29).

19. Install retaining pin (28) in stud (29).

Perform step (17) through (19) on left side of vehicle.

21. Lower cab (WP 0019 00).

0052 00-26