DECOMPRESSING SUSPENSION - continued

TM 9-2320-391-10

PREPARATION FOR INTERNAL AIR TRANSPORT,

0052 00

HIGHWAY, OR RAIL SHIPMENT Continued

DECOMPRESSING SUSPENSION - Continued

10. Position SUSPENSION knob (33) to RAISE.

NOTE

Use back-up hydraulic pump (WP 0037 00) if pressing PUMP knob does not

accomplish step (10).

11. Press and hold PUMP knob (35) until vehicle returns to normal height and suspension

compression plate (30) is loose.

WARNING

Both suspension compression plates must be removed from axle

studs. Failure to comply may result in serious injury or death to

personnel.

NOTE

Left and right side suspension compression plates are removed the same

way. Right side suspension compression plate shown.

12. Remove retaining pin (28) from axle stud (36).

13. Remove suspension compression plate (30) from axle stud (36).

14. Perform steps (12) and (13) on left side of vehicle.

0052 00-25