PREPARATION FOR COLD ENVIRONMENT OPERATIONS - continued

TM 9-2320-391-10

VEHICLE OPERATION IN COLD ENVIRONMENT

0048 00

32 F TO -25 F (0 C to -32 C) - Continued

PREPARATION FOR COLD ENVIRONMENT OPERATIONS - Continued

NOTE

LH and RH eyenuts are installed the same way. Left side shown.

10. Turn screw (8) to the left to unlock cab step tread (9).

11. Remove self-locking nut (10), washer (11), screw (12), and washer (13) from cab

step (14). Discard self-locking nut.

12. Install washer (13) and screw (12) in cab step (14) with washer (11) and eyenut (15).

13. Lock cab step tread (9) by turning screw (8) one half turn to the right.

14. Perform previous three steps on right side of vehicle.

0048 00-6