 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-391-10
CENTRAL TIRE INFLATION SYSTEM (CTIS)
0020 00
OPERATION - Continued
OPERATE IN RUN FLAT
CAUTION
Do not use RUN FLAT continuously for more than 40 minutes. Using RUN
FLAT for more than 40 minutes can cause tires to over-inflate. Failure to
comply may cause damage to equipment.
NOTE
CTIS is operated in RUN FLAT when tire(s) have been punctured. RUN FLAT
causes CTIS to check tire pressure every 15 seconds (normal interval is
every 15 minutes). If low air pressure is sensed, CTIS will supply air in wet
tank to leaking tire(s) every 15 seconds.
CTIS will begin inflating tires to selected mode pressure after RUN FLAT has
been operating for 10 minutes. RUN FLAT button must be pressed again to
continue operating in RUN FLAT.
1.
Press RUN FLAT mode button (9). RUN FLAT light (10) will illuminate when CTIS is
operating in RUN FLAT.
2.
If operating CTIS in RUN FLAT is no longer required, press RUN FLAT mode button
(9) again. RUN FLAT light (10) will go out.
3.
Change leaking tire(s) (WP 0089 00) as soon as possible.
0020 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version