FIRST CLUTCH MAINTENANCE - continued - TM-9-2320-386-24-1-20643

TM 9-2320-386-24-1-2

0381 00

FIRST CLUTCH MAINTENANCE (Contd)

INSTALLATION

1. Apply oil-soluble grease to seal ring grooves of piston (3).

2. Install new inner seal (1) and new outer seal (2) on piston (3). Ensure lips of seals (1) and (2) face

downward.

3. Apply lubricating oil to forward clutch seal protector and piston bore.

4. Install forward clutch seal protector over hub in transmission (6).

5. Install piston (3) in transmission (6). Ensure tang of piston (3) engages slot in transmission (6).

6. Remove forward clutch seal protector from of transmission (6).

7. Install twenty-two springs (5) and spring retainer (4) on piston (3).

8. Position first clutch spring compressor in transmission (6). Tighten nut until spring retainer (4)

clears snapring groove in transmission (6).

9. Install snapring (7) on spring retainer (4) in transmission (6).

10. Remove first clutch spring compressor from transmission (6).

0381 00-8