Quantcast PLANETARY GEARING MAINTENANCE - continued - TM-9-2320-386-24-1-20625

 

Click here to make tpub.com your Home Page

Page Title: PLANETARY GEARING MAINTENANCE - continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
PLANETARY GEARING MAINTENANCE - continued - TM-9-2320-386-24-1-20624
Up
/.5ton/TM-9-2320-386-24-1-2 Extended Service Program (ESP) for 2-1/2-Ton 6x6 M44A3 Series Trucks (Diesel) Manual
Next
PLANETARY GEARING MAINTENANCE - continued - TM-9-2320-386-24-1-20626
TM 9-2320-386-24-1-2
0379 00
PLANETARY GEARING MAINTENANCE (Contd)
CLEANING AND INSPECTION
WARNING
Volatile mineral spirits burn easily and fumes can explode. Do not
smoke or allow flames nearby when using volatile mineral spirits.
Failure to do so may cause serious injury or death to personnel.
1. Clean all gears and shafts thoroughly with mineral spirits and dry with a lint-free rag.
2. Inspect front planetary carrier (1), center planetary carrier (5), rear planetary carrier (7), and
center ring gear (11) for indication of wear or overheating, scratches, burrs, breaks, and heavy
metal contamination. Replace front planetary carrier (1), center planetary carrier (5), or rear
planetary carrier (7) if damaged.
3. Measure clearance between front planetary carrier bushing bore (2) and mating surface on sun
gear (3). Replace front planetary carrier (1) if clearance exceeds 0.005 in. (0.13 mm) between
bushing (2) and mating surface of sun gear (3).
4. Measure clearance of output shaft bushing (8) on output shaft (9) and main shaft (10). Replace
output shaft (9) if clearance exceeds 0.0065 in. (0.165 mm).
5. Inspect sun gears (3), (4), and (6) for wear or overheating, scratches, burrs, breaks, and heavy
metal contamination. Replace sun gears (3), (4), or (6), if damaged.
6. Inspect main shaft (10) for wear or damage. Replace main shaft (10), if damaged.
7. Inspect center ring gear (11) for wear or damage. Replace center ring gear (11), if damaged.
1
5
2
4
3
0379 00-4

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business