 |
|||
|
|
|||
|
Page Title:
TRANSMISSION CONTROL VALVE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0371 00
TRANSMISSION CONTROL VALVE REPLACEMENT (Contd)
INSTALLATION
CAUTION
Do not tilt control valve, or selector valve will drop out and may
be damaged.
1.
Install new strainer element (7), closed end first, in control valve (2).
2.
Install governor tubes (3) and (4) on control valve (2).
3.
Install valve body lifter on drilled boss (8) of control valve (2).
4.
Position control valve (2), with governor tubes (3) and (4) attached, on transmission (9).
5.
Remove valve body lifter from control valve (2).
6.
Install control valve (2) on transmission (9) with sixteen screws (10). Tighten screws (10) 8-12 lb-ft
(11-16 Nm).
7.
Install first clutch feed tube (6) on transmission (9) and control valve (2) with screw (5).
8.
Install detent roller and spring (11) on control valve (2) with screw (1).
9.
Install transmission oil pan and filter (WP 0370 00).
Change 1
0371 00-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version