CAMSHAFT BEARING SLEEVES MAINTENANCE (Contd)
Note assembled position (oil hole orientation) of all camshaft
bearings prior to removal.
Remove six camshaft bearing sleeves (3) and camshaft bearing sleeve (1) from engine block (2).
CLEANING AND INSPECTION
Check bearing sleeves (1) and (3) for scoring, cracks, or debris. Replace bearing sleeves (1) and (3) if
scored, cracked, or if debris is found.
Oil hole for inside bearings is located at top of bore. Oil hole for
front bearing is aligned with oil hole in block.
1. Install camshaft bearing sleeve (1) and six camshaft bearing sleeves (3) in engine block (2).
2. Install camshaft (WP 0359 00).