Quantcast TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued - TM-9-2320-386-24-1-20361

 

Click here to make tpub.com your Home Page

Page Title: TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued - TM-9-2320-386-24-1-20360
Up
/.5ton/TM-9-2320-386-24-1-2 Extended Service Program (ESP) for 2-1/2-Ton 6x6 M44A3 Series Trucks (Diesel) Manual
Next
TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued - TM-9-2320-386-24-1-20362
TM 9-2320-386-24-1-2
0335 00
TRANSMISSION (IN-VEHICLE) REPLACEMENT (Contd)
PREPARATION FOR REPLACING AT1545P TRANSMISSION WITH AT545 TRANSMISSION
NOTE
Perform the following procedure only when replacing AT1545P
transmission with AT545 transmission.
1.
Remove elbow (10) and adapter (3) from AT1545P transmission (9). Discard elbow (10).
2.
Remove breather (6) from AT545 transmission (1).
3.
Install adapter (3) and elbow (NSN 4730-01-128-9088) (2) in AT545 transmission (1) to set threads.
4.
Remove elbow (NSN 4730-01-128-9088) (2) and adapter (3) from AT545 transmission (1). Apply
thread sealant. Install adapter (3) and elbow (NSN 4730-01-128-9088) (2) back in AT545
transmission (1).
5.
Remove tee (4) and elbow (5) from AT1545P transmission (9).
6.
Install elbow (5) and tee (4) at same location on AT545 transmission (1).
7.
Remove backup light switch (7) from AT1545P transmission (9).
8.
Remove plug cap from backup light switch port in AT545 transmission (1).
9.
Install backup light switch (7) in AT545 transmission (1) in same location as in AT1545P
transmission (9).
10.
Install plug cap in backup light switch port in AT1545P transmission (9).
11.
Remove neutral safety switch (8) from AT1545P transmission (9).
12.
Remove plug cap from neutral safety switch port in AT545 transmission (1).
13.
Install neutral safety switch (8) in AT545 transmission (1) in same location as in AT1545P
transmission (9).
14.
Install plug cap on neutral safety switch port in AT1545P transmission (9).
Change 1
0335 00-10

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business