Quantcast TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued - TM-9-2320-386-24-1-20355

 

Click here to make tpub.com your Home Page

Page Title: TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued - TM-9-2320-386-24-1-20354
Up
/.5ton/TM-9-2320-386-24-1-2 Extended Service Program (ESP) for 2-1/2-Ton 6x6 M44A3 Series Trucks (Diesel) Manual
Next
TRANSMISSION (IN-VEHICLE) REPLACEMENT - continued - TM-9-2320-386-24-1-20356
TM 9-2320-386-24-1-2
0335 00
TRANSMISSION (IN-VEHICLE) REPLACEMENT (Contd)
8.
Disconnect oil inlet hose (4) and oil outlet hose (3) from elbow (6) and tee (5).
NOTE
Route vent tube from elbow through firewall.
9.
Disconnect secondary exhaust vent tube (7) from elbow (8). Discard vent tube if replacing AT1545P
transmission with AT545 transmission only.
10.
Disconnect lead 324 (1) from temperature switch (2).
NOTE
Assistant will help with steps 11 through 27.
11.
Remove locknut (12), screw (9), and clamp (11) from shift bracket (10). Discard locknut (12).
12.
Disconnect two leads 74A and 74B (14) from neutral safety switch leads 74A and 74B (13).
13.
Remove screw (15), clamp (16), modulator (29), and packing retainer (17) from transmission (18).
Discard packing retainer (17).
14.
Remove nut (27), washer (26), and manual control lever (31) from shaft (30).
15.
Remove two screws (21), lockwashers (20), and shift bracket (10) from transmission (18). Discard
16.
Tie modulator cable (28) and shift bracket (10) with shift cable (19) away from transmission (18).
17.
Remove four screws (24), washers (23), and cover (22) from flywheel housing (25).
18.
Rotate crankshaft to access six screws (34).
19.
Remove six screws (34) from ring (32) and ring gear (33).
1
8
7
2
3
4
AT545 TRANSMISSION
5
6
7
10
9
14
12
8
11
AT1545P TRANSMISSION
13
Change 1
0335 00-4

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business