Quantcast REAR WIRING HARNESS REPLACEMENT - continued - TM-9-2320-386-24-1-20341

 

Click here to make tpub.com your Home Page

Page Title: REAR WIRING HARNESS REPLACEMENT - continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
REAR WIRING HARNESS REPLACEMENT - continued - TM-9-2320-386-24-1-20340
Up
/.5ton/TM-9-2320-386-24-1-2 Extended Service Program (ESP) for 2-1/2-Ton 6x6 M44A3 Series Trucks (Diesel) Manual
Next
REAR WIRING HARNESS REPLACEMENT - continued - TM-9-2320-386-24-1-20342
TM 9-2320-386-24-1-2
0332 00
REAR WIRING HARNESS REPLACEMENT (Contd)
NOTE
Trailer receptacle must be positioned with key in receptacle
towards right side of vehicle.
14.
Route trailer receptacle (30) through cargo bed bracket (1) and align mounting holes.
NOTE
Waterproof cover must be positioned with hinge aligned with
trailer receptacle key.
15.
Install waterproof cover (29) and trailer receptacle (30) on rear cargo bed bracket (1) with two new
lockwashers (25) and (28), screws (26) and (27), clamp (8), and four new locknuts (9).
16.
If removed, install two grommets (23) on frame rails (13).
NOTE
Route wiring harness through grommets in frame rails before
installing clamps.
17.
Install ground (GND) leads (4) and (5) on cargo bed bracket (1) with new lockwasher (3), screw (2),
new lockwasher (6), and new locknut (7).
18.
Connect leads 380A and 21 (10) to rear lighting harness leads 380A and 21 (24).
19.
Connect four harness leads 21, 22-461, 23, and 24 (19) on left side and 21, 22-460, 23, and 24 (19) on right
side to taillight leads 21, 22-461, 23, and 24 (17) on left side and 21, 22-460, 23, and 24 (17) on right side.
20.
Position clamp (20) on wiring harness (21) and install clamp (20) on taillight mounting bracket (16)
with screw (18) and new locknut (22).
21.
Position clamp (12) on wiring harness (21) and install clamps (12) and (15) on frame rail (13) with
screw (14) and new locknut (11).
22.
Position clamp (32) on wiring harness (21) and install clamp (32) on frame rail (13) with screw (31)
and new locknut (33).
23.
Install ground (GND) lead (35) on frame rail (13) with screw (37), new lockwasher (36), and new
locknut (34).
24.
Position clamp (40) on wiring harness (21) and install clamp (40) on taillight mounting bracket (39)
with screw (41) and new locknut (38).
25.
Position two clamps (44) on wiring harness (21) and install clamps (44) on cargo bed bracket (1)
with two screws (42) and new locknuts (45).
26.
Install plastic chafe guard (43) on wiring harness (21).
27.
Connect battery ground cable (WP 0121 00).
0332 00-10

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business