Quantcast FRONT WIRING HARNESS REPLACEMENT - continued - TM-9-2320-386-24-1-20292

 

Click here to make tpub.com your Home Page

Page Title: FRONT WIRING HARNESS REPLACEMENT - continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
FRONT WIRING HARNESS REPLACEMENT - continued - TM-9-2320-386-24-1-20291
Up
/.5ton/TM-9-2320-386-24-1-2 Extended Service Program (ESP) for 2-1/2-Ton 6x6 M44A3 Series Trucks (Diesel) Manual
Next
FRONT WIRING HARNESS REPLACEMENT - continued - TM-9-2320-386-24-1-20293
TM 9-2320-386-24-1-2
0330 00
FRONT WIRING HARNESS REPLACEMENT (Contd)
42.
Remove nut (40), lockwasher (39), and ground (GND) lead (38) from fuel shutoff solenoid
terminal (37). Discard lockwasher (39).
43.
Remove nut (69), lockwasher (70), and leads 54A (71) and 770-R (72) from fuel shutoff solenoid
terminal (74). Discard lockwasher (70).
44.
Disconnect oil pressure sender lead 36 (41) from engine oil pressure transducer (42).
45.
Remove nut (68), lockwasher (67), clamp (66) with wiring harnesses (73) and (65), and ground
(GND) lead (75) from mounting stud (43). Discard lockwasher (67).
46.
Disconnect plug with leads 569 and 569B (52) from quick-start unit connector (53).
NOTE
If quick-start bracket is mounted on engine, perform step 47 to
access wiring harness clamps.
47.
Remove four screws (44), lockwashers (45), ground strap (51), lockwasher (50), and quick-start
bracket (46) from engine (47). Discard lockwashers (45) and (50).
48.
Remove locknut (64) and two clamps (63) and (48) with wiring harnesses (73) and (65) and
magnetic speed sensor plug leads (61) from mounting stud (49). Discard locknut (64).
49.
Disconnect wiring harness plug with leads 429 and 428 (62) from magnetic speed sensor plug (61).
50.
Remove locknut (57), clamp (54) with wiring harness (60), and screw (55) from transmission shift
lever bracket (56). Discard locknut (57).
51.
Disconnect wiring harness leads 74A and 74B (59) from two neutral safety switch leads (58).
45
40 41
38
39
44
42
46
47
43
37
49
48
50
74
73
75
51
52
72
53
66
69
71
55
54
67
70
68
56
65
63 62
61
64
60
57
59
58
0330 00-9

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business