 |
|||
|
|
|||
|
Page Title:
ENGINE OIL COOLER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0314 00
ENGINE OIL COOLER REPLACEMENT (Contd)
NOTE
Have drainage container ready to catch coolant and oil.
REMOVAL
1.
Remove plug (15), O-ring (14), spring (13), and bypass valve (12) from oil cooler cover (6). Discard
O-ring (14).
2.
Remove seven screws (8), washers (7), screws (10), washers (9), screw (11), oil cooler cover (6), and
gasket (5) from oil cooler core (4). Discard gasket (5).
3.
Remove oil cooler core (4), gasket (1), and two O-rings (3) from cylinder block (2). Discard
O-rings (3) and gasket (1).
INSTALLATION
1.
Install two new O-rings (3), new gasket (1), and oil cooler core (4) on cylinder block (2).
2.
Install new gasket (5) and oil cooler cover (6) on oil cooler core (4) with seven washers (9),
screws (10), washers (7), screws (8), and screw (11). Tighten screws (8), (10), and (11) 15-25 lb-ft
(20-34 Nm).
3.
Install bypass valve (12), spring (13), new O-ring (14), and plug (15) on oil cooler cover (6).
4.
Install turbocharger (WP 0325 00).
5.
Install engine oil filter (WP 0033 00).
6.
Install alternator (Prestolite) (WP 0089 00) or (Leece-Neville) (WP 0090 00).
7.
Connect battery ground cable (WP 0121 00).
8.
Fill cooling system (WP 0068 00).
0314 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version