 |
|||
|
|
|||
|
Page Title:
ENGINE OIL PUMP MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-2
0313 00
ENGINE OIL PUMP MAINTENANCE (Contd)
REMOVAL
NOTE
Have drainage pan ready to catch any excessive oil.
Remove two screws (5), lockwashers (4), screw (6), oil pump body assembly (3), and O-ring (2) from
cylinder block (1). Discard lockwashers (4) and O-ring (2).
DISASSEMBLY
1.
Remove screw (11), washer (10), idler gear (9), bearing (8), and spacer (7) from oil pump body
assembly (3).
2.
Remove screw (12), outlet elbow (13), and O-ring (14) from oil pump body (15). Discard O-ring (14).
3.
Remove two screws (28), washers (27), intake tube (26), and gasket (25) from oil pump body (15).
Discard gasket (25).
4.
Remove four screws (18), washers (17), oil pump body (15), and impeller (24) from oil pump
assembly (3).
5.
Using arbor press, remove driven gear (19) and impeller (16) from oil pump body assembly (3).
6.
Remove screw (22), retaining washer (23), spring (21), and pressure relief plunger (20) from oil
pump body assembly (3).
0313 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version