POWER PLANT REPLACEMENT - continued - TM-9-2320-386-24-1-20049

TM 9-2320-386-24-1-2

0295 00

POWER PLANT REPLACEMENT (Contd)

34.

Remove nut (24), screw (15), and washer (14) from radiator (12), and install end of chain on radiator (12)

with washer (14), screw (15), and nut (24).

35.

Remove nut (9), screw (11), and washer (10) from radiator (12), and install end of chain on radiator (12)

with washer (10), screw (11), and nut (9).

36.

Install chain on lifting device.

37.

Remove locknut (25), screw (28), washer (32), bushing front (31) and rear (30) halves, and

washer (29) from braces (26) and (27). Discard locknut (25) and bushing front (31) and rear (30)

halves.

Remove four locknuts (19), screws (17), washers (18), and pivot mount (16) from support

38.

bracket (20). Discard locknuts (19).

39.

Remove clamp (22) and hose (23) from lower flange (21) on radiator (12).

40.

Remove two locknuts (8), screws (1), washers (7), bushings rear (6) and front (4) halves, and

washers (3) from braces (2) and (5). Discard locknuts (8) and bushing front (4) and rear (6) halves.

WARNING

All personnel must stand clear during lifting operations.

A snapped chain, or shifting or swinging load, may cause injury to

personnel.

CAUTION

When removing radiator, avoid contact with fan actuator hub.

Contact between the radiator and fan actuator hub can cause

damage to the radiator.

41.

Lift radiator (12) and charged air cooler (13) from vehicle and lower onto supports.

42.

Remove nuts (9) and (24), screws (11) and (15), washers (10) and (14), and chain from radiator (12).

43.

Install washer (10), screw (11), and nut (9) on radiator (12).

44.

Install washer (14), screw (15), and nut (24) on radiator (12).

LIFTING DEVICE

CHAIN

0295 00-8