 |
|||
|
|
|||
|
Page Title:
SPEEDOMETER DRIVESHAFT REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0288 00
SPEEDOMETER DRIVESHAFT REPLACEMENT (Contd)
REMOVAL
1.
Pull back floor insulation to gain access to cab floor (18).
2.
Remove eight assembled-washer bolts (5), four screws (7), lockwashers (8), and toeboard (6) from
cab floor (18), cab tunnel (15), and firewall (20). Discard assembled-washer bolts (5) and
lockwashers (8).
3.
Turn four lockstuds (3) 1/4-turn left and pull instrument mounting panel (2) away from instrument
panel (4).
4.
Remove speedometer driveshaft (10) from speedometer (1).
5.
Remove two locknuts (19), screws (16), clamps (17), and speedometer driveshaft (10) from
firewall (20) and cab floor (18). Discard locknuts (19).
6.
Remove locknut (14), clamp (11), screw (13), and speedometer driveshaft (10) from
crossmember (12). Discard locknut (14).
7.
Remove speedometer driveshaft (10) from adapter (9) and vehicle.
INSTALLATION
1.
Install speedometer driveshaft (10) on adapter (9).
2.
Install speedometer driveshaft (10) on crossmember (12) with screw (13), clamp (11), and new
locknut (14).
3.
Install speedometer driveshaft (10) on firewall (20) and cab floor (18) with two clamps (17), screws (16),
and new locknuts (19).
4.
Install speedometer driveshaft (10) on speedometer (1).
5.
Install instrument mounting panel (2) on instrument panel (4) and turn four lockstuds (3) 1/4-turn
right.
6.
Install toeboard (6) on cab floor (18), cab tunnel (15), and firewall (20) with eight new assembled-
washer bolts (5), four new lockwashers (8), and screws (7).
7.
Lubricate fitting (WP 0023 00).
8.
Connect battery ground cable (WP 0121 00).
0288 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version