 |
|||
|
|
|||
|
Page Title:
SPEEDOMETER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0286 00
SPEEDOMETER REPLACEMENT (Contd)
NOTE
Appropriate locking hardware is provisioned with gauge.
REMOVAL
1.
Turn four lockstuds (2) 1/4-turn to left and pull instrument mounting panel (3) away from
instrument panel (1).
2.
Disconnect speedometer driveshaft (4) from speedometer (5).
3.
Remove two nuts (9), lockwashers (8), wire harness (6), bracket (7), and speedometer (5) from
instrument mounting panel (3).
INSTALLATION
1.
Install speedometer (5), bracket (7), and wire harness (6) on instrument mounting panel (3) with
two lockwashers (8) and nuts (9).
2.
Connect speedometer driveshaft (4) to speedometer (5).
3.
Position instrument mounting panel (3) on instrument panel (1) and install by turning four
lockstuds (2) 1/4-turn to right.
4.
Connect battery ground cable (WP 0121 00).
5.
Start engine (TM 9-2320-386-10) and road test vehicle to check speedometer for proper operation.
0286 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version