 |
|||
|
|
|||
|
Page Title:
SWINGFIRE HEATER WATER JACKET REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0260 00
SWINGFIRE HEATER WATER JACKET REPLACEMENT (Contd)
REMOVAL
NOTE
Have clean drainage container ready to catch coolant.
1.
Remove drainplug (5) and drain coolant from water jacket (4).
2.
Remove two nuts (14), lockwashers (15), screws (17), clamp (16), and exhaust tube (13) from
exhaust port (18). Discard lockwashers (15).
3.
Loosen clamps (7) and (12), and remove inlet hose (11) from inlet port (1) and outlet hose (6) from
outlet port (3).
4.
Remove two locknuts (9), screws (2), and water jacket (4) from brackets (8) and (10). Discard
locknuts (9).
INSTALLATION
1.
Install water jacket (4) on brackets (8) and (10) with two screws (2) and new locknuts (9).
2.
Install inlet hose (11) on inlet port (1) and outlet hose (6) on outlet port (3) and tighten clamps (12)
and (7).
3.
Install exhaust tube (13) on exhaust port (18) with two screws (17), new lockwashers (15), and
nuts (14).
4.
Apply sealant to male threads of drainplug (5).
5.
Install drainplug (5) on water jacket (4).
6.
Fill cooling system to proper level (WP 0068 00).
0260 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version