 |
|||
|
|
|||
|
Page Title:
ENGINE COOLANT HEATER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0253 00
ENGINE COOLANT HEATER REPLACEMENT (Contd)
REMOVAL
NOTE
Prior to removal, close fuel shutoff, engine oil, and water manifold
valves.
Have drainage container ready to catch coolant.
1.
Disconnect harness (3) from heater (4).
2.
Disconnect fuel line (1) from elbow (14).
3.
Remove clamp (13) and hose (12) from elbow (11).
4.
Remove cotter pin (10) and elbow (8) from heater (4). Discard cotter pin (10).
5.
Remove clamp (6) and hose (5) from elbow (7).
6.
Remove two clamps (9) and heater (4) from saddle brackets (2).
INSTALLATION
1.
Install heater (4) on two saddle brackets (2) with clamps (9).
2.
Install hose (5) on elbow (7) with clamp (6).
3.
Install elbow (8) on heater (4) with new cotter pin (10).
4.
Install hose (12) on elbow (11) with clamp (13).
5.
Connect fuel line (1) to elbow (14).
6.
Connect harness (3) to heater (4).
7.
Connect battery ground cable (WP 0121 00).
0253 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version