 |
|||
|
|
|||
|
Page Title:
BRUSHGUARD REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0230 00
BRUSHGUARD REPLACEMENT (Contd)
REMOVAL
1.
Unlock two side panels (5), open and slide panels (5) forward while depressing catch on front hinges (7).
Remove panels (5) from hinges (7).
2.
Remove four screws (12), lockwashers (11), and washers (10) from brushguard (1) and two lower side
panels (13). Discard lockwashers (11).
3.
Remove four locknuts (9), washers (8), screws (4), and two lower side panels (13) from fenders (6).
Discard locknuts (9).
4.
Remove two cotter pins (14), retaining pins (2), and disconnect two strut rods (3) from
brushguard (1). Discard cotter pins (14).
5.
Remove two nuts (18), lockwashers (19), washers (20), and brushguard (1) from two studs (21).
Discard lockwashers (19).
CAUTION
When disconnecting lines and hoses, plug all openings to prevent
dirt from entering and causing damage to internal parts. Remove
all plugs prior to installation.
NOTE
Brushguard may require lifting and tilting prior to disconnecting
of auxiliary oil cooler lines.
6.
Remove oil line (22) from elbow (27) on radiator (26), and oil filter line (25) from elbow (24) on
auxiliary oil cooler (23).
7.
Remove four locknuts (15), screws (16), and two baffles (17) from brushguard (1). Discard
locknuts (15).
8.
Remove brushguard (1) from vehicle.
9.
Remove four screws (32), washers (31), and auxiliary oil cooler (23) with four rubber mounts (30)
from brushguard (1).
10.
Remove eight rivets (29) and two bumpers (28) from brushguard (1). Discard rivets (29).
0230 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version