 |
|||
|
|
|||
|
Page Title:
FRONT BUMPER REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0227 00
FRONT BUMPER REPLACEMENT (Contd)
NOTE
Left and right side of bumper is removed the same. This task
covers the right side of bumper.
REMOVAL
NOTE
Assistant will help with step 1.
1.
Remove two locknuts (1), screws (4), and bumper (3) from frame (2). Discard locknuts (1).
NOTE
Mark bumper support brackets for installation.
2.
Remove six locknuts (10), screws (5), and two upper bumper support brackets (9) from bumper (3).
Discard locknuts (10).
3.
Remove four locknuts (7), screws (6), and two lower bumper support brackets (8) from bumper (3).
Discard locknuts (7).
INSTALLATION
1.
Install two lower plates (8) on bumper (3) with four screws (6) and new locknuts (7).
2.
Install two upper plates (9) on bumper (3) with six screws (5) and new locknuts (10).
NOTE
Assistant will help with step 3.
3.
Install bumper (3) on frame (2) with two screws (4) and new locknuts (1).
4.
Install front upper and lower shackles and brackets (w/winch, WP 0189 00) or (w/o winch,
0227 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version