 |
|||
|
|
|||
|
Page Title:
DRIVER'S SEAT REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0209 00
DRIVER'S SEAT REPAIR (Contd)
ASSEMBLY
NOTE
Perform steps 1 and 2 if shock absorber was removed.
1.
If shock absorber (7) was removed, install inserts (8) and (19) on ends of new shock absorber (7) and
position shock absorber (7) on upper support bracket (16), pry spring (17) back, and slide screw (18)
through upper support bracket (16) and shock absorber (7).
2.
Install other end of shock absorber (7) on lower support bracket (11) and slide screw (9) through
lower support bracket (11) and shock absorber (7). Install and tighten new locknuts (6) and (20).
3.
Install two stop bumpers (12) on seat support mechanism assembly (10) with two new
lockwashers (13) and nuts (14).
4.
Install four spacers (41) and seat riser (37) on seat support mechanism assembly (10) with four
washers (40), new lockwashers (39), and screws (38).
5.
Install boot (4) on seat support mechanism assembly (10) with four push pins (21), U-clips (3), and
two push pins (5).
6.
Install cover (43) and weight adjuster knob (44) on weight adjuster shaft (42) with pin (45).
7.
Apply sealing compound to threads of screws (36) and install seatbelt bar (35) on seat support
mechanism assembly (10) with two screws (36).
8.
Install four spacers (22) and slide adjuster assemblies (2) on seat support mechanism assembly (10)
with four contact washers (23), screws (1), and two new locknuts (15).
9.
Install four spacers (48) and seat support plate (31) on slide adjuster assemblies (2) with four
washers (47), screws (46), and new locknuts (49).
10.
If seat backrest upholstery was removed, install seat backrest upholstery on seat backrest (29) with
ten new retaining rings (30).
11.
If seat cushion upholstery was removed, install seat cushion upholstery on seat cushion (51) with
eighteen new upholstery clips (50).
12.
Install right seatbelt bracket (26) and right and left side support brackets (27) on seat cushion (51)
with four washers (25) and screws (24).
13.
Install seat backrest (29) between right and left side support brackets (27) with four washers (25)
and screws (24).
14.
Install seat assembly (28) on seat support plate (31) with four washers (32), new lockwashers (33),
and nuts (34).
15.
Install driver's and companion seats (WP 0208 00).
0209 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version