 |
|||
|
|
|||
|
Page Title:
REAR AND INTERMEDIATE CAB TUNNEL AND TOEBOARD REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0207 00
REAR AND INTERMEDIATE CAB TUNNEL AND TOEBOARD REPLACEMENT (Contd)
INTERMEDIATE CAB TUNNEL REMOVAL
CAUTION
When removing cab tunnel, use care not to damage air lines and
hoses.
1.
Remove two locknuts (13), screws (5), and cover (6) from cab tunnel (7). Discard locknuts (13).
2.
Remove thirteen screws (4), lockwashers (3), and intermediate cab tunnel (7) from cab floor (12),
toeboard (1), and rear cab tunnel (10). Discard lockwashers (3).
TOEBOARD REMOVAL
Remove eight assembled-washer bolts (2) and toeboard (1) from cab floor (12). Discard assembled-
washer bolts (2).
REAR CAB TUNNEL REMOVAL
1. Remove eight assembled-washer bolts (11) and rear cab tunnel (10) from cab floor (12).Discard
assembled-washer bolts (11).
2. Remove four screws (9) and cover (8) from rear cab tunnel (10).
REAR CAB TUNNEL INSTALLATION
1. Install cover (8) on rear cab tunnel (10) with four screws (9).
2. Install rear cab tunnel (10) on cab floor (12) with eight new assembled-washer bolts (11).
TOEBOARD INSTALLATION
Install toeboard (1) on cab floor (12) with eight new assembled-washer bolts (2).
INTERMEDIATE CAB TUNNEL INSTALLATION
CAUTION
When installing cab tunnel, use care not to damage air lines
and hoses.
1.
Install intermediate cab tunnel (7) on toeboard (1), rear cab tunnel (10), and cab floor (12) with
thirteen new lockwashers (3) and screws (4).
2.
Install cover (6) on cab tunnel (7) with two screws (5) and new locknuts (13).
3.
Install cab insulation (WP 0201 00).
4.
Install winch controls, if installed (WP 0223 00).
5.
Install transmission shift tower (for intermediate cab tunnel replacement only) (WP 0133 00).
6.
Install transmission select lever (for intermediate cab tunnel replacement only) (WP 0134 00).
7.
Install companion seat (WP 0208 00).
0207 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version