 |
|||
|
|
|||
|
Page Title:
WINDSHIELD ASSEMBLY MAINTENANCE - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0205 00
WINDSHIELD ASSEMBLY MAINTENANCE (Contd)
REMOVAL
1.
Remove six assembled-washer bolts (15) and two upper hinges (16) from windshield frame (2) and
cab (3). Discard assembled-washer bolts (15).
NOTE
Assistant will help with step 2.
2.
Remove windshield frame (2) from cab (3).
3.
Remove eight assembled-washer bolts (12) and two lower hinges (11) from cab (3). Discard
assembled-washer bolts (12).
4.
Remove four screws (4) and two brackets (9) from windshield frame (2).
5.
Remove four screws (8), two plates (7), and weatherstrips (6) from brackets (9). Discard
weatherstrips (6).
6.
Remove weatherstrip (1) from windshield frame (2). Discard weatherstrip (1).
7.
Clean weatherstrip remains from windshield frame (2).
DISASSEMBLY
1.
Remove two knobs (5) and studs (14) from upper hinges (16).
2.
Remove two locknuts (13), hinge bolts (10), and upper hinges (16) from lower hinges (11). Discard
locknuts (13).
ASSEMBLY
1.
Install two upper hinges (16) on two lower hinges (11) with two hinge bolts (10) and new
locknuts (13).
2.
Install two studs (14) and knobs (5) on upper hinges (16).
INSTALLATION
1.
Apply adhesive to mounting side of new weatherstrip (1) and install weatherstrip (1) on mounting
surface of windshield frame (2).
2.
Install two new weatherstrips (6) and plates (7) on brackets (9) with four screws (8).
3.
Install two brackets (9) on windshield frame (2) with four screws (4).
4.
Install upper hinges (16) on windshield frame (2) with six new assembled-washer bolts (15).
NOTE
Assistant will help with step 5.
5.
Position windshield frame (2) on cab (3).
6.
Install two lower hinges (11) on cab (3) with eight new assembled-washer bolts (12).
7.
Install wiper switch, motor, and conlink covers (WP 0232 00).
8.
Install cab soft top (TM 9-2320-386-10).
0205 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version