 |
|||
|
|
|||
|
Page Title:
COMPOSITE HOOD HINGES REPLACEMENT (BUILT AFTER SERIAL NO. 504923) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0198 00
COMPOSITE HOOD HINGES REPLACEMENT (BUILT AFTER SERIAL NO. 504923) (Contd)
WARNING
Keep fingers clear of hood and cowling when replacing hinges.
Failure to do so may result in injury to personnel.
REMOVAL
1.
Turn four lockstuds (3) 1/4-turn to the left and pull instrument cluster (2) away from instrument
panel (1).
NOTE
Assistant will help with steps 2 through 4.
2.
Remove eight screws (5), lockwashers (4), and two reinforcements (11) from cowling (12). Discard
lockwashers (4).
3.
Remove hood (9) from vehicle.
4.
Remove eight screws (7), lockwashers (8), two reinforcements (10), and hinges (6) from hood (9).
Discard lockwashers (8).
INSTALLATION
NOTE
Assistant will help with steps 1 through 4.
1.
Install two hinges (6) and reinforcements (10) on hood (9) with eight new lockwashers (8) and
screws (7). Finger-tighten screws (7).
2.
Position hood (9) on vehicle.
3.
Install two hinges (6) and reinforcements (11) on cowling (12) with eight new lockwashers (4) and
screws (5).
4.
Tighten screws (7).
5.
Position instrument cluster (2) to instrument panel (1), and install by turning four lockstuds (3)
1/4-turn to the right.
6.
Install side panels (WP 0203 00).
7.
Install glove compartment (TM 9-2320-361-20).
0198 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version