 |
|||
|
|
|||
|
Page Title:
FRONT SPRING REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0193 00
FRONT SPRING REPLACEMENT (Contd)
NOTE
Left and right front springs are replaced the same way. This
procedure covers the right front spring.
REMOVAL
1.
Raise front of vehicle and remove two jack stands from under front axle (5).
2.
Support vehicle at frame (18) with two jack stands.
3.
Place hydraulic jack under front axle (5).
4.
Remove jamnut (10), nut (11), retainer (12), and rubber bushing (13) from shock absorber piston
rod (17).
5.
Push shock absorber piston rod (17) up and out of right axle bracket (7).
6.
Remove rubber bushing (15) and retainer (16) from piston rod (17).
7.
Remove four nuts (9), lockwashers (8), and right axle bracket (7) from two U-bolts (1). Discard
lockwashers (8).
8.
Remove two U-bolts (1), saddle (2), and rubber bumper (3) from spring (4).
9.
Remove two locknuts (20) and screws (23) from shackle (19). Discard locknuts (20).
10.
Remove two locknuts (20) and screws (23) from hanger (24). Discard locknuts (20).
11.
Remove two lubrication fittings (21) from pins (22).
NOTE
Assistant will help with steps 12 through 17.
12.
Remove pin (22) from shackle (19) and spring (4).
13.
Remove pin (22) from hanger (24) and spring (4).
14.
Push shackle (19) toward front of vehicle.
15.
Push spring (4) clear of rear hanger (24).
16.
Lift spring (4) clear of spring seat (6) and remove from vehicle.
17.
Remove spring seat (6) from centering peg (14) and front axle (5).
0193 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version