 |
|||
|
|
|||
|
Page Title:
CTIS WHEEL VALVE REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0177 00
CTIS WHEEL VALVE REPAIR (Contd)
REMOVAL
WARNING
Do not disconnect air lines and fittings before draining reservoirs.
Small parts under pressure may shoot out with high velocity,
causing injury to personnel.
Eyeshields must be worn when releasing compressed air. Failure
to do so may result in injury to personnel.
NOTE
Front and rear wheel valve assemblies are repaired the same.
This procedure covers the left front wheel valve.
Tag all hoses, lines, and tubes for installation.
1.
Remove two screws (16) and lockwashers (15) from stone shield (17) and flange (6). Discard
lockwashers (15).
2.
Remove two nuts (14) and stone shield (17) from two studs (7).
3.
Remove valve cap (18) and valve core (19) from air valve (12) and deflate tire. Install valve core (19)
and valve cap (18) on air valve (12) after deflating tire.
4.
Loosen nut (21) and remove air line (1) from elbow (20) on wheel valve (13).
5.
Remove two nuts (2) from studs (5) and wheel valve mounting plate (3).
6.
Loosen nut (9) and remove wheel valve mounting plate (3) and air line (10) from adapter (8) and
studs (5) at the same time.
7.
Remove four locknuts (11), screws (4), and wheel valve (13) from wheel valve mounting plate (3).
Discard locknuts (11).
0177 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version