 |
|||
|
|
|||
|
Page Title:
CTIS CONTROL HARNESS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0129 00
CTIS CONTROL HARNESS REPLACEMENT (Contd)
REMOVAL
1.
Remove tiedown straps (3) as necessary. Discard tiedown straps (3).
2.
Disconnect CTIS control harness (2) from manifold (1).
3.
Remove screw (4), lockwasher (5), and three ground (GND) leads (6) from manifold (1). Discard
lockwasher (5).
4.
Remove eight assembled-washer bolts (7) from toeboard (8) and four screws (10) and
lockwashers (11) from intermediate cab tunnel (9) to allow for removal of CTIS control harness (2).
Discard assembled-washer bolts (7) and lockwashers (11).
5.
Remove toeboard (8) from vehicle.
6.
Remove CTIS control harness (2) from vehicle.
INSTALLATION
1.
Position CTIS control harness (2) in vehicle.
2.
Install three ground (GND) leads (6) on manifold (1) with new lockwasher (5) and screw (4).
3.
Connect CTIS control harness (2) to manifold (1).
4.
Install tiedown straps (3) as necessary to secure CTIS control harness (2) and ground (GND)
leads (6).
5.
Position toeboard (8) in vehicle and install on intermediate cab tunnel (9) with four new
lockwashers (11), screws (10), and eight new assembled-washer bolts (7).
6.
Install toeboard and tunnel insulation (WP 0201 00).
7.
Install ECU (WP 0283 00).
8.
Connect battery ground cable (WP 0121 00).
0129 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version