 |
|||
|
|
|||
|
Page Title:
FRONT SIDE MARKER LIGHTS AND LAMPS REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0108 00
FRONT SIDE MARKER LIGHTS AND LAMPS REPLACEMENT (Contd)
NOTE
Replacement of front left and right side marker lights are the
same. This procedure covers the left side marker light.
REMOVAL
1.
Remove two screws (12) and cover (11) with lens cover (10) from side marker light (6).
2.
If lens cover (10) is damaged, remove two push clips (9) and lens cover (10) from cover (11).
3.
Remove lamp (8) from side marker light (6).
4.
Remove four locknuts (14) and screws (13), and lift rear of headlight mounting bracket (1) to access
nuts (2), lockwashers (3), and electrical connectors. Discard locknuts (14).
5.
Disconnect side marker light plug 489 (4) from wiring harness connector with lead 21 (15).
6.
Remove four nuts (2), lockwashers (3), screws (7), side marker light (6), and gasket (5) from
headlight mounting bracket (1). Discard lockwashers (3) and gasket (5).
INSTALLATION
1.
Install new gasket (5) and side marker light (6) on headlight mounting bracket (1) with four
screws (7), new lockwashers (3), and nuts (2).
2.
Connect side marker light plug with lead 489 (4) to wiring harness connector with lead 21 (15).
3.
Lower headlight mounting bracket (1) into position and secure with four screws (13) and new
locknuts (14).
4.
Install lamp (8) in side marker light (6).
5.
If removed, install lens cover (10) on cover (11) with two push clips (9).
6.
Install cover (11) with lens cover (10) on side marker light (6) with two screws (12).
7.
Connect battery ground cable (WP 0121 00).
0108 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version