 |
|||
|
|
|||
|
Page Title:
TRANSMISSION NEUTRAL SAFETY SWITCH REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-386-24-1-1
0098 00
TRANSMISSION NEUTRAL SAFETY SWITCH REPLACEMENT (Contd)
REMOVAL
1.
Disconnect two leads 74B and 74A (8) from neutral safety switch plugs (7).
2.
Remove locknut (3), screw (6), and clamps (2) and (9) from shift bracket (4). Discard locknut (3).
3.
Remove two neutral safety switch plugs (7) from clamp (9).
4.
Clean area around neutral safety switch (5) with rag.
CAUTION
Plug opening immediately after removing neutral safety switch to
prevent dirt and dust from entering transmission. Failure to do so may
cause damage to transmission. Remove plug prior to installation.
5.
Remove neutral safety switch (5) from transmission (1).
INSTALLATION
1.
Apply sealant to male threads of neutral safety switch (5).
2.
Install neutral safety switch (5) on transmission (1).
3.
Position clamp (9) on two neutral safety switch plugs (7).
4.
Install clamps (9) and (2) on shift bracket (4) with screw (6) and new locknut (3).
5.
Connect two leads 74B and 74A (8) to neutral safety switch plugs (7).
6.
Connect battery ground cable (WP 0121 00).
0098 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version