 |
|||
|
|
|||
|
Page Title:
FUEL LINE DUST CAP ASSEMBLY TOOL |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0471 00
MANUFACTURED ITEMS LISTS (Contd)
FUEL LINE DUST CAP ASSEMBLY TOOL
1.000 IN.
(25.400 MM)
0.12 IN. (3.05 MM) DIA
0.03 IN.
(0.76 MM)x 45
7 (REF)
0.840 IN.
30
(21.336 MM)
0.40 IN. (10.16 MM) DIA
(REF)
DIA
0.770 IN.
0.840 IN.
(19.558 MM) DIA
(21.336 MM)
0.250 IN. (6.350 MM)
0.780 IN.
(19.812 MM)
1.620 IN. (41.148 MM)
4.500 IN. (114.300 MM)
1.
Fabricate from NSN 9510-00-224-1691, QQS634, carbon steel cylinder, 5.000 in. (127.000 mm) in
length and 0.90 in. (22.86) in diameter.
2.
The tolerance on all three decimal dimensions is + 0.005 in. (0.127 mm) and the tolerance on all
two place decimal dimensions is + 0.03 in. (0.76 mm).
3.
Trim steel to dimensions in diagram above.
4.
Drill one hole to dimensions in diagram above.
5.
Tool is used for installation of dust caps on fuel injector tubes.
0471 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version