DIFFERENTIAL CARRIER REPAIR - continued

TM 9-2320-361-24-2

0455 00

DIFFERENTIAL CARRIER REPAIR (Contd)

DISASSEMBLY (Contd)

26.

Remove six screws (5), lockwashers (4), bearing cover (3), and shims (2) from carrier (1). Discard

lockwashers (4). Record number/thickness of shims (2) removed. Tie shims (2) to bearing cover (3).

NOTE

Use brass drift to hold bevel gear in place while removing

screws.

27.

Remove safety wire (8), two screws (7), and plate (6) from helical pinion shaft (11). Discard safety

wire (8).

CAUTION

Puller screws must be turned evenly until bearing cage is free

from carrier. Failure to remove cage evenly will result in

damage to bearing cage, bearings, and carrier.

28.

Remove bearing cage (9) and shims (10) from carrier (1) with two puller screws. Record

number/thickness of shims (10) removed. Tie shims (10) to bearing cage (9).

CAUTION

Use brass drift to remove bearings and bearing seat from

bearing cage. Failure to do so may result in damage to bearings

and bearing seat.

29.

Remove bearing seat (12), bearings (13) and (14), and bearing seat (15) from bearing cage (9).

CAUTION

Support beveled gear with soft metal spacers. Failure to do so

may result in damage to equipment.

When removing helical pinion shaft ensure shaft does not

become caught on carrier housing. Failure to do so may result

in damage to pinion shaft.

30.

Press helical pinion shaft (11) from bevel gear (16).

31.

Remove woodruff key (17) from helical pinion shaft (11). Discard woodruff key (17).

CAUTION

Use brass drift to remove bevel gear, bearing, and spacer from

carrier. Failure to do so may result in damage to gear, bearings,

or spacer.

32.

Remove bevel gear (16), bearing (21), and spacer (20) from carrier (1).

33.

Remove spacer (20) from bearing (21).

0455 00-6