60-AMPERE ALTERNATOR REPAIR - continued

TM 9-2320-361-24-2

0448 00

60-AMPERE ALTERNATOR REPAIR (Contd)

ASSEMBLY (Contd)

26.

Install shim (2), insulator (3), and brush holder (7) on end housing (1) with three screws (6).

27.

Position positive output strap (9) on output plate stud (13) and install on positive rectifier

plate (12) with new lockwasher (11) and screw (10).

28.

Install two springs (4) into brush holder (7).

29.

Install two brush leads (15) and lead (16) on insulator (3) and output strap (9) with new

lockwasher (18) and two screws (14).

30.

Install capacitor (8) on output plate stud (13) and negative rectifier plate (17) with washer (22),

new lockwasher (21), nut (19), and screw (20).

31.

Position capacitor (8) on end housing (1) with insulating compound.

32.

Install brushes (5) in brush holder (7) against springs (4). Hold in position.

33.

Install end housing (1) on intermediate housing (23) with six new lockwashers (24) and screw (25).

34.

Align locating scribe marks (26) on intermediate housing (23) and end housing (1).

0448 00-16