 |
|||
|
|
|||
|
Page Title:
ENGINE COOLANT HEATER HOUSING REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0425 00
ENGINE COOLANT HEATER HOUSING REPLACEMENT (Contd)
REMOVAL
1.
Remove three screw-assembled lockwashers (2) from heater housing (1). Discard screw-assembled
lockwashers (2).
2.
Separate heater housing (1) and remove heat exchanger (5) from heater housing (1).
INSTALLATION
1.
Ensure flame detector adapter (3) and exhaust tube (4) are aligned and install heat exchanger (5)
in heater housing (1) with three screw-assembled lockwashers (2).
2.
Install burner (WP 0424 00).
3.
Install restriction thermostat (WP 0419 00).
4.
Install flame detector switch (WP 0417 00).
5.
Connect battery ground cable (WP 0126 00).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
0425 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version