 |
|||
|
|
|||
|
Page Title:
ARCTIC CARGO BODY ENCLOSURE REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-361-24-2
0410 00
ARCTIC CARGO BODY ENCLOSURE REPLACEMENT (Contd)
INSTALLATION (Contd)
NOTE
Position tarpaulin so both sides hang down evenly.
18.
Install tarpaulin (1) onto cargo body (3). Ensure vent hole (2) in tarpaulin assembly (1) lines up
with vent hole on roof supports. Refer to TM 9-2320-361-10.
19.
Install support panel (7) on tarpaulin (1) and cargo body (3) with four screws (8), eight washers (9),
and nuts (14).
20.
Install two brackets (16) to front cargo body (3) with eight screws (15).
21.
Install two strips (11) on cargo body (3) with twelve screws (10).
22.
Install two corner brackets (12) to cargo body (3) with six screws (13).
23.
Install three strips (4) and strip (6) to cargo body (3) with fifty screws (5).
24.
Install clamping strips (18), (21), and (23) to rear closure assembly (17) with thirty two screws (22).
25.
Install two rear corner brackets (25) to rear closure assembly (17) and cargo body (3) with eight
screws (27).
26.
Install handle (26) to rear enclosure assembly (17) with four washers (20) and two new locknuts (19).
27.
Install step assembly (24) to rear closure panel (17).
28.
Install speaking tube (WP 0411 00).
29.
Install fire extinguisher (WP 0393 00).
30.
Install troop seats (WP 0253 00), seat cushions and backrests.
31.
32.
Install reflectors (WP 0252 00).
33.
Connect battery ground cable (WP 0126 00).
34.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
2
1
4
3
4
6
4
5
5
0410 00-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version